VRX935VD 45
English
Owner’s manual
CD/MD ChangerOperations
Note:
•When an optional DVD (CD/MD) changer is con-
nected through the CeNET cable, this unit con-
trols all DVD (CD/MD) changer functions. This unit
can control a total of 2 changers (MD and/or CD
and/or DVD).

CD/MD changer functions

Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD (MD) chang-
ers are connected, press the [FUNC] button to
select the CD (MD) changer for play.
∗If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC
CHECKING” appears in the display while the
player loads (checks) the magazine.
∗If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
∗If “NO DISC” appears in the display, load MDs
into the MD changer.

Pausing play

1. Press the [ss
ss
s] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [ss
ss
s] button
again.
∗When the panel is open, the same operation
is also available by using the [s] button in
the panel.

Switching the CD TEXT titles

This operation is only possible when this unit is
connected with a CD TEXT compatible CD
changer.
You can select the CD TEXT titles among the
disc titles, track titles and artist titles.
When the panel is closed:
1. Press the [DISP] button to show the SUB
display. The disc title, track title or artist titles,
user title is displayed.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the display
toggles among the disc title, the track title or
the artist titles, user title.
The selected title scrolls once.
CD-ROM discs cannot be played in the CD
changer.
CAUTION

Switching CONNECT(connect)

Make the following settings when an external
device is connected to the VISUAL 2 terminal.
NAVI: when a navigation system is con-
nected
∗When a navigation system is con-
nected, use the monitor lock function.
Locking the monitor locks the screen
size in F.WIDE mode (full wide) and
the VTR system to NTSC.
OTHERS: for external devices other than a
navigation system
NONE: when no external devices are con-
nected
∗The factory default setting is “NONE”.
1. When the panel is open, press the [ADJ] but-
ton to display the ADJUST MODE menu.
2. Touch the [z] key two times to select “CON-
NECT”.
Touch the [CONNECT] key to select “NAVI”
or “OTHERS” or “NONE”.
3. Press the [ADJ] button again or touch the
[RTN] key, the unit returns to the previous
mode.
VISUAL Operations