Clarion vrx 630 owner manual DSP operations, Operations common to each mode

English Owner’s manual

Other Functions

Clock Adjustment

1.Press the ADJ button * to display the ad- justment selection display.

2.Move the JOYSTICK ¡ up or down to select CLOCK, then press ENT at the center of the JOYSTICK ¡ to display the clock adjust- ment display.

3.Move the JOYSTICK ¡ left or right to select HR or MIN, then move the JOYSTICK ¡ up or down to adjust the time.

∗ The time is displayed in 12-hour format.

4.Pressing ENT at the center of the JOYSTICK ¡ when the cursor is above HR or MIN saves the adjusted value in memory and simulta- neously returns the display to the previous display (adjustment selection display).

To cancel clock adjustment before comple- tion, use the JOYSTICK ¡ to move the cur- sor to MENU, then press ENT at the center of the JOYSTICK ¡.

Triggered audio mute for cellular telepones

This unit requires special wiring to mute the au- dio signal automatically when a cellular tele- phone rings in the car.

∗This function is not compatible wiht all cellular telepones Contact your local authorized Clarion dealer for information on proper instal- lation and compatibility.

DSP operations

DSP control function

If the DSP (DPH910), sold separately, is con- nected to this unit using the CeNET cable, all the functions of the DSP can be controlled.

∗When the DSP is connected, an external amplifier is required.

∗DSP control can all be operated only when the panel is open.

DSP functions

There are 2 modes available in DPH910, stan- dard mode and professional mode. Choose one of them and adjust the sound field and the sound quality.

●Functions common to each mode:

Such as auto loudness, subwoofer etc.

●Standard mode:

Adjustment using the graphic equalizer function and the DSP function.

●Professional mode:

Adjustment using the space equalizer function and the parametric equalizer function.

∗When the standard mode is selected, adjustment for the professional mode cannot be made. On the contrary, when the professional mode is se- lected, adjustment for the standard mode cannot be made.

∗For details on functions of each mode, refer to the owner’s manual supplied with the DPH910.

∗Hereafter the graphic equalizer is referred to as a G.EQ, the space equalizer referred to as VSE and the parametric equalizer referred to as P.EQ.

Operations common to each mode

Output adjustment of auto loud- ness, subwoofer and playback band

1.Press the ADJ button * to switch to the ad- justment selection display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “SOUND” and press the ENT at the center of the JOYSTICK ¡ to change into the Sound adjustment display. In the Sound adjustment display “A.LD LEVEL”, “W.OUT”, “W.LPF”, “HPF”, “T.TONE” are listed.

Operate the JOYSTICK ¡ rightward or leftward to select an item to be adjusted.

3. To make an adjustment on:

32 VRX630