Clarion vrx 630 owner manual Standard mode/G.EQ operations, EQ effect ON/OFF

DSP operations

English Owner’s manual

4.Operate the JOYSTICK ¡ rightward or left- ward to select “BALANCE” or “FADER”.

5.Operate the JOYSTICK ¡ upward or down- ward to make an adjustment.

6.Operate the JOYSTICK ¡ rightward or left- ward to move the cursor to “MENU”, and press the ENT at the center of the JOY- STICK ¡ to return to the AUDIO-MODE dis- play.

Standard mode/G.EQ operations

Note:

•The adjustment made in standard mode is not re- flected in the adjustment in professional mode. Re- spectively, the adjustment made in professional mode is not reflected in the adjustment in standard mode.

G.EQ effect ON/OFF

* The factory default setting is “ON”.

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “EQ ON/OFF”. “ON” and “OFF” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward or left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set it.

4.After the setting, press the A-M button & again to return to the STANDARD display.

Note:

•If the G.EQ effect is set to OFF, the adjustment made in “G.EQ operations” is not reflected in the music source.

Calling G.EQ BASIC Pattern/USER Pattern

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “EQ MODE”. “BASIC” and “USER” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward or left- ward to select the item thus called, and press the ENT at the center of the JOYSTICK ¡ to show BASIC pattern selecting display or USER pattern selection/memory display.

4.In the Pattern selecting display, operate the JOYSTICK ¡ rightward or leftward to se- lect P1 to P6, and press the ENT at the center of the JOYSTICK ¡ to call corre- sponding G.EQ pattern. In this display, pressing the No. button in correspondence to the preset button # can also call the G.EQ pattern.

∗After selecting P1 to P6 by the JOYSTICK ¡, press ENT at the center of the JOY- STICK ¡ for 2 seconds or longer to copy the selected pattern to the USER pattern.

∗Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show G.EQ adjusting display, in which the properties of currently selected pattern can be adjusted.

∗By pressing the BND button % in BASIC pattern selecting display or USER pattern selection/memory display you can switch be- tween the two patterns, BASIC and USER.

5.Operate the JOYSTICK ¡ rightward or left- ward to select “MENU”, and press the ENT at the center of the JOYSTICK ¡ to return to the AUDIO-MODE display.

Setting and storing G.EQ Proper- ties/Memory into USER Pattern

1.Repeat the steps 1 to 3 of the previous procedure (Calling G.EQ BASIC Pattern/ USER Pattern) to show BASIC pattern se- lecting display or USER pattern selection/ memory display.

2.Operate the JOYSTICK ¡ leftward and rightward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show the G.EQ adjusting display.

3.When some frequency to be adjusted is se- lected by operating the JOYSTICK ¡ right- ward or leftward in the G.EQ adjusting dis- play, a gain setting value at the selected fre- quency is displayed.

4.Operate the JOYSTICK ¡ upward or downward to adjust the G.EQ GAIN.

∗By pressing the preset buttons # once in the G.EQ adjusting display, the setting value for currently stored USER pattern is obtained.

5.After making adjustments to a desired pat- tern by repeating the operations of items 3 and 4, operate the JOYSTICK ¡ rightward or leftward to move the cursor to “RTN”, and press the ENT at the center of the JOY- STICK ¡ to change over to the BASIC/ USER pattern selection/memory display.

34 VRX630