Clarion vrx 630 owner manual Basic Operations, Adjusting the volume, Turning on and off the power

8. OPERATIONS

Basic Operations	Note: Be sure to read this chapter referring to the front diagrams of
	chapter “3. CONTROLS” on page 5 (unfold).

English

Owner’s manual

CAUTION

When the unit is turned on, starting and stop- ping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.

Note:

• Use this unit after starting the engine.

Adjusting the volume

Operate the VOLUME button 2 in the direction of the arrows w (up) or z (down) to adjust the volume;

w: Increases the volume.

z: Decreases the volume.

∗The volume level indicated in the display is in a range from 0 (minimum) to 33 (maximum).

Turning on and off the power

Note:

•Be careful about using this unit for a long time with- out running the engine. If you drain the car’s bat- tery too far, you may not be able to start the en- gine and this can reduce the service life of the battery.

1.Press the POWER button 1.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the POWER button 1for 1 sec- ond or longer to turn off the power for the unit.

Note:

•About the “SYSTEM CHECK”

The confirmation of connected equipment must be performed for this unit only when the wiring con- nection is complete and power is turned on to the unit first. When the power is supplied, “SYSTEM ”

and “PUSH PWR” appear alternately in the dis- play. Press the POWER button 1, the system

check starts inside the unit. When “COMPLETE” appears, press once again the POWER button 1.

Selecting a mode

1.Press the FNC button 1 to change the mode of operation.

2.Each time you press the FNC button 1, the mode of operation changes in the following order:

Radio mode ➜ DAB mode ➜ CD changer mode ➜ MD changer mode ➜ DVD changer mode ➜ TV mode ➜ Radio mode...

∗External equipment not connected with CeNET is not selected.

CAUTION

While driving, keep the volume at a level at which external sounds can be heard.

Switching the display

When the panel is closed:

Press the DISP button @ to select the desired dis- play.

Each time you press the DISP button @, the dis- play switches in the following order:

Notes:

•Once selected, the preferred display becomes the default display. When a function adjustment such as volume is made, the display momentarily switches to that function’s display, then returns back to the preferred display several seconds af- ter the adjustment.

14 VRX630