Clarion vrx 630 owner manual Calling P.EQ Basic Pattern/USER Pattern

DSP operations

3.Operate the JOYSTICK ¡ rightward or left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set it.

Note:

•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.

Calling P.EQ BASIC Pattern/USER Pattern

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “P.EQ MODE”. “BASIC” and “USER” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward or left- ward to select the item thus called, and press the ENT at the center of the JOYSTICK ¡ to show BASIC pattern selecting display or USER pattern selection/memory display.

4.In the pattern selecting display, operate the JOYSTICK ¡ rightward or leftward to select P1 to P6, and press the ENT at the center of the JOYSTICK ¡ to call corresponding P.EQ pattern. In this display, pressing the No. but- ton in correspondence to the Preset buttons

# can also call the P.EQ pattern.

∗After selecting P1 to P6 by operating the JOY- STICK ¡, press the ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to copy the selected pattern to the USER pattern.

∗Operate the JOYSTICK ¡ rightward or left- ward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show P.EQ adjusting display, in which the properties of currently selected pattern can be adjusted.

∗By pressing the BND button % in BASIC pat- tern selecting display or USER pattern selec- tion/memory display you can switch between the two patterns, BASIC and USER.

5.Operate the JOYSTICK ¡ rightward or left- ward to select “MENU”, and press the ENT at the center of the JOYSTICK ¡ to return to the AUDIO-MODE display.

3.Select an item to be adjusted by operating the JOYSTICK ¡ rightward or leftward in the P.EQ adjusting display.

4.Operate the JOYSTICK ¡ upward or down- ward to set each adjusting value.

∗By pressing the preset buttons # once in the P.EQ adjusting display, the setting value for currently stored USER pattern is obtained.

5.After making adjustments to a desired pat- tern by repeating the operations of items 3 and 4, operate the JOYSTICK ¡ rightward or leftward to move the cursor to “RTN”, and press the ENT at the center of the JOY- STICK ¡ to change over to the BASIC/ USER pattern selection/memory display.

6.Operate the JOYSTICK ¡ rightward or left- ward in the BASIC/USER pattern selection/ memory display to select USER memory P1 to P6 to be stored, and press the ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to store the adjusted P.EQ pattern to the USER memory.

∗By pressing the preset buttons # 1 to 6 for 2 seconds or longer in the P.EQ adjusting dis- play, the P.EQ pattern can be stored in the USER memory.

7.To set a title of the stored USER pattern, op- erate the JOYSTICK ¡ rightward or leftward to select “TITLE” and press the ENT at the center of the JOYSTICK ¡ to change into the Title Input display.

∗For title inputting method, refer to the section “Entering titles”.

8.Operate the JOYSTICK ¡ rightward or left- ward to select “MENU” and press the ENT at the center of the JOYSTICK ¡ to change into the AUDIO-MODE display.

English Owner’s manual

Setting and storing P.EQ Proper- ties/Memory into USER Pattern

1.In the Basic adjustment display or in the User setting display, press the A-M button & to show the AUDIO-MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show the P.EQ adjusting display.

VRX630 37