C320 FEATURES
➤Neck Loop/Auxillary Port
The C320 has a 3.5mm phono jack to use with a neck loop. The volume to the neck loop is controlled with the Clarity Power Control. When the neck loop is plugged in, the receiver in the handset is disabled.
➤Operations
Once you have installed your Walker C320 according to the instructions noted previously, it will be ready to use.
➤To Place or Receive a Call:
1.Adjust the Clarity® Power ControlTM to its lowest setting (zero).
2.Pick up the handset and listen for the caller’s voice or a dial tone.
3.When placing a call, dial as you would any phone and wait for someone to answer.
4.Press the BOOST button.
5.Adjust the Clarity Power Control upwards to a level where the other party’s voice is heard loud and clear, and begin conversation.
6.When you complete the call, return the handset.
7.After hanging up, the sound level will reset according to the position of the reset switch on the back of the telephone.
(See Boost Reset Switch instructions on page 12.)
8.Pressing the BOOST Button during subsequent conversations will return the volume to your set sound level.
Note: If you made an error while dialing, just depress the hookswitch, listen for a dial tone, and dial again.
16 | C320 |
