TELEPHONE OPERATIONS
•At anytime, the user can press FLASH button one time to go back to standby mode.
Or
•It will go back to standby automatically at 30 seconds time out if there is no action.
Callback from CALLER ID Information
To callback from incoming call information, the base T/P switch should be set at T.
While reviewing the incoming call list, press ENTER and the UP (▲) or DOWN (▼) key will format the number with the following
dialing variations:
•7 digits without a 1 prefix:
If the area code of the Caller ID number matches to the setting of the stored area code, the dialed numbers can be 7 digits only.
•Area Code + 7 digits without a 1 prefix:
If the area code of the Caller ID number matches to the setting of the stored area code, the dialed numbers can be Area Code + 7 digits.
•10 digits without a 1 prefix:
If the area code of the Caller ID number is different from the stored area code, the dialed numbers can be 10 digits without a 1 prefix.
•10 digits with a 1 prefix:
If the area code of the Caller ID number is different from the stored area code, the dialed numbers can be 1 + 10 digits.
When reviewing the Caller ID information, press ENTER to display the phone number in a different format.
TELEPHONE OPERATIONS
Example 1:
Stored Long Distance Service code: 1.
Stored area code: 770.
Stored incoming call number
1.Pressing the ENTER key will show blinking
2.Pressing the TALK or ENTER key again will dial out 1234567.
Or
3.Pressing the UP (▲) key will show blinking
Or
4.Pressing the UP (▲) key will show blinking
Or
5.Pressing the UP (▲) key will show blinking 123-4567 again.
Example 2:
Stored Long Distance Service code: 1.
Stored area code: 770.
Stored incoming call number
1.Pressing the ENTER key will show blinking
2.Pressing the TALK or ENTER key again will dial out 4134567890.
Or
4.Pressing the UP (▲) key will show blinking
Or
34 | 35 |
