FEATURE SET UP
Handset Ringer
Set the switch marked Ringer OFF/VIBE/ON located on the side of the handset.When VIBE is selected the handset will ring and vibrate when receiving and incoming call. The ringer switch must be set to ON or VIBE for the handset
to ring.
Note: If both handset and base ringers are set to OFF, the visual ringer will flash to indicate there is an incoming call.
Pulse/Tone
Slide the switch to the type of telephone service you have;TONE for
Flash
The FLASH button is activated to use custom calling services such as Call Waiting or
Mute
The MUTE button allows the user to conduct a private conversation that you do not want the person on the other end to hear.While in the mute mode, the MUTE button will illuminate RED and the microphone in the handset is disabled. Pressing the MUTE button again will disengage the MUTE feature.
Redial/Pause
Press the RD/P button to redial the last number dialed. Pressing the RD/P button while storing a telephone number will insert a four (4) second pause. This is commonly used when storing both the telephone number and an extension or PIN number.
FEATURE SET UP
TELEPHONE BASE
Ringer Volume
The base ringer volume adjustments are located on the side of the telephone base.
Pressing the UP (▲) key on the base increases the ringer sound by one level while pressing the DOWN (▼) key reduces the sound by one level.There are a total of six levels from maximum to minimum.The ringer will sound for two (2) seconds while choosing a ringer volume, to allow the user to make a choice.
Ringer Style
The base ringer style adjustments are located on the side of the telephone base.The style of ring can be adjusted by pressing the RING STYLE button. Six (6) styles are available allowing you to customize your ring. The ringer will sound for two (2) seconds while choosing a ringer style, to allow the user to make a choice.
Visual Ringers
Visual ringers are located in both the handset antenna and the base of the telephone.When an incoming call is received, these lights will flash.The handset visual ringer will also stay lit while the phone is in use.
BOOST ON/OFF Switch
This switch will disable the reset feature of the BOOST Clarity Power button as follows:
ON – When the BOOST ON/OFF switch is set to ON, the Boost function will be ON every time a call starts, and will default to ON every time the phone hangs up. During a call, the BOOST Clarity Power button can toggle the Clarity Power ON or OFF according to the user’s needs.
20 | 21 |
