FEATURE SET UP
OFF – When the BOOST ON/OFF switch is set to OFF, the Boost function will be OFF every time a call starts, and the user will need to press the BOOST Clarity Power button in order to gain the extra level of amplification. If the phone hangs up, the Clarity Power will reset to OFF. During a call, the BOOST Clarity Power button can toggle the Clarity Power function ON or OFF according to the user’s needs.
CAUTION:VOLUME WILL BE LOUD WHEN BOOST SWITCH IS SET TO “ON.”
Battery Back-up
Installing four (4) AA Alkaline batteries into the desk/wall mount bracket attached to the telephone base will offer you a limited amount of time to con- tinue operating your telephone in the event of
a power failure.
To Install Battery Back-up Batteries
1.Disconnect telephone line cord and remove desk/wall mount bracket from telephone base.
2.Disconnect battery
3.Install four (4) AA Alkaline batteries with negative
4.Connect battery
5.Install desk/wall mount bracket to telephone base.
FEATURE SET UP
To Replace Battery Backup Batteries
1.Disconnect telephone line cord and remove desk/wall mount bracket from telephone base.
2.Disconnect battery
3.Remove batteries from desk/wall mount bracket.
4.Install four (4) AA Alkaline batteries with negative
5.Connect battery
6.Install desk/wall mount bracket to telephone base
After installing the four (4) AA Alkaline batteries please refer to the chart below:
Power Supply | Power LED Status |
|
|
AC adapter and | Steady Green |
good batteries |
|
|
|
AC adapter and | Steady Red |
no batteries |
|
|
|
AC adapter and | Flashing green and red |
bad batteries |
|
|
|
Power failure and | Slow flashing red |
good batteries |
|
|
|
Power failure and | Fast flashing red |
bad batteries |
|
22 | 23 |
