Clarke manual Problem, Cause, Action, CLARKE TECHNOLOGY Operators Manual -EncoreS20E, Page

PROBLEM	CAUSE	ACTION
The cleaning is not even.	The scrub brush or pad is worn.	Replace the scrub brush or pad.
	There is damage to the brush assembly,	Have an authorized service person make
	caster or the solution valve.	the needed repairs.
	The brush motor is not running	Check for tripped breaker. Reset. Check
		for loose connections.
	The solution level is low.	Fill the solution tank.
		NOTE: If the problem continues consult
		an authorized service person.
The machine does not run.	The machine loses power	Reset the circuit breaker.
		Do not use an extension cord.
	Main switch is off.	Turn main switch on.
	Power cord disconnected.	Reconnect power cord.
	Wall circuit breaker blown.	Reset wall circuit breaker.

CLARKE TECHNOLOGY Operator's Manual -Encore S20E Page -15-