Clarke S20E manual Procedures For Transpoting cont, How to Remove the Machine From a Van or Truck

Models: S20E

1 23
Download 23 pages 59.64 Kb
Page 7
Image 7
Procedures For Transpoting (cont.)

Procedures For Transpoting (cont.)

How to Remove the Machine From a Van or

Truck

1.Make sure there are no obstructions in the area.

2.Make sure the unloading ramp is at least eight

(8) feet long and a minimum of 32" wide, and strong enough to support the machine.

3.Make sure the ramp is clean and dry.

4.Put the ramp in position.

5.Unfasten the machine.

How to Remove the Machine From a Van or WARNING: The machine is heavy. Make sure you use two able persons to assist in moving the machine down the ramp.

6.Get two people to pull machine off ramp. It is recommended that the machine be unloaded in the forward position.

7.As the machine begins to travel down the ramp, use two people to maintain a slow downward speed.

8.Replace squeegee assembly, brush housing, and brush or pad driver after machine is un- loaded and ready to use.

CLARKE TECHNOLOGY Operator's Manual -Encore S20E

Page -7-

Page 7
Image 7
Clarke S20E manual Procedures For Transpoting cont, How to Remove the Machine From a Van or Truck