TABLE OF CONTENTS

INTRODUCTION

2

Thank You

2

Read This Manual

2

Warranty

2

Measurements

2

Serial Numbers

2

Ordering Parts

2

Directions

2

Pre-Delivery Check List

3

Delivery Check List

3

Owner’s Record

3

SAFETY PRECAUTIONS

4

Training

4

Preparation Safety

4

Engine Safety

4

Operational Safety

4

OPERATION

5

Preparation

5

Starting Engine

5

Transporting TURF RAKE/ TURF SEEDER

5

Operating TURF RAKE/ TURF SEEDER

5

OPTIONAL BLADE ASSEMBLIES

6

Changing Blade Assemblies

6

Replacing Shaft Assembly Only

6

Recommended Height Adjustments

6

INTRODUCTION

THANK YOU

Thank you for purchasing a CLASSEN TRS-20/ TSS-20.

READ THIS MANUAL

Read this manual carefully in its entirety. It contains assembly, operating, maintenance, adjustment instructions and a parts list for your TRS-20/TSS-20. By following the operating and maintenance instructions you will prolong the life of your equipment and maintain its maximum efficiency. Failure to do so could result in personal injury or equipment damage. This manual should be considered a permanent part of your TRS-20/TSS-20 and should remain with it if you sell it.

WARRANTY

Refer to last page.

GENERAL MAINTENANCE

8

TURF RAKE/ TURF SEEDER Maintenance

8

Engine Maintenance

8

MACHINE STORAGE

8

Storing TURF RAKE/ TURF SEEDER

8

Operation After Extended Storage

8

CARE FOR HYDRAULIC SYSTEM

9

PARTS MAIN FRAME ASSEMBLY

10

PARTS SELF PROPELLED ASSEMBLY ....11

PARTS HANDLE ASSEMBLY

12

SEEDER/MULTIPURPOSE

 

BLADE ASSEMBLY

13

SLICER BLADE ASSEMBLY

13

SEED BOX ASSEMBLY

14

SEEDER TIRE SCRAPE INSTALLATION 15

SEED BOX INSTALLATION

15

SAFETY DECALS

16

NOTES

17

WARRANTY

18

MEASUREMENTS

U.S. Units of measure are used in this manual.

SERIAL NUMBERS

Write frame and engine serial numbers, plus model numbers in “Owner’s Record” section below. You may need these numbers when you order parts. The serial number sticker plate is located near the left rear corner of the TRS-20/TSS-20 frame.

ORDERING PARTS

When ordering parts, always give the serial number and model of your TRS-20/TSS-20 as well as the quantity, part number and description of the part needed.

DIRECTIONS

“Right Hand” and “Left Hand” sides of the TRS-20/TSS-20 are determined by facing the “back” of the unit as you would operate the machine.

2

Page 2
Image 2
Classen TRS-20, TSS-20 manual Table of Contents, Introduction

TRS-20, TSS-20 specifications

Classen TSS-20 and TRS-20 are two powerful tools designed for turf care and soil management, specifically targeting professional landscapers and dedicated gardening enthusiasts. Both models are equipped with a host of features, technologies, and characteristics that facilitate efficient turf maintenance and soil aeration.

The Classen TSS-20 is primarily recognized for its superior turf seeding capabilities. With a 20-inch seeding width, it allows for wider coverage and faster operation, making it ideal for larger areas. The TSS-20 features a precision seed delivery system that ensures even seed distribution and minimizes waste. This system is designed to accommodate a variety of seed types, including fescue, rye, and bluegrass, enabling users to customize their seeding approach based on their specific lawn care needs.

On the other hand, the TRS-20 is tailored for aerating soil and enhancing root systems. The TRS-20 utilizes a core aeration method, where it pulls out soil plugs, thereby reducing soil compaction and promoting better drainage. The unit is equipped with heavy-duty tines that penetrate deep into the soil, enabling it to reach areas otherwise inaccessible. This process significantly enhances turf health by allowing essential nutrients, water, and air to penetrate the root zone.

Both the TSS-20 and TRS-20 are powered by reliable, high-performance engines, ensuring robust operation even in demanding conditions. Their compact and lightweight design allows for easy maneuverability, while the collapsible handles provide convenient storage options when not in use.

In terms of maintenance, both models are designed for durability and longevity. They feature corrosion-resistant components and are easy to service, ensuring minimal downtime for users. The intuitive control interfaces make operation straightforward, allowing even novice users to achieve professional-quality results.

In conclusion, the Classen TSS-20 and TRS-20 represent cutting-edge solutions for turf care and soil management. Their unique features, innovative technologies, and user-centric designs make them invaluable assets for anyone looking to maintain a healthy and vibrant lawn. Whether for professional landscaping or personal gardening projects, these machines deliver consistent performance and results that exceed expectations.