Clearaudio Champion user manual Assembly and Operation

Champion Level 1

USER MANUAL

3. Assembly and Operation

First please put on the white gloves to avoid finger prints on the surface of the acrylic chassis during installation.

1.Place first the lower part-chassis on a clean and soft surface. Please pay attention, that the surface of your HiFi-rack is horizontal and vertical correctly adjusted, by using the delivered level gauge. Important: Never turn the Spikes of the turntable chassis, they had been adjusted in the factory. Use the delivered Flad Pads to avoid scratches on the surface of your HiFi-rack. After that place the chassis with the mounted bearing onto the first one.

2.Now unpack your turntable platter and place the platter carefully on the upper part of the bearing which is mounted in the turntable chassis. Important: take care not to cause to much pressure!

3.Place the pulley on the motor spindle. The distance between the pulley and the motor housing should be approx. 1-2mm. Tighten the little screws inside the pulley with the aluminium screwdriver provided.

Page 5  clearaudio electronic GmbH 2006