22 | FlexCam iCam Digital — Appendix |
Optional accessories
Contact your ClearOne Reseller for more information on the following accessories.
FlexLiteTM
The FlexLite is designed for use with any flexible camera. Dual flexneck top lights attach to the base of your FlexCam to provide adequate lighting for all subjects. Available in 110 V (NTSC) and 220 V (PAL) versions.
Microscope eyepiece adapter
Create a secure connection between your camera and microscope with the microscope eye- piece adapter. Simply remove the original eyepiece of the microscope and replace with the adapter for a tighter fit between camera and microscope.
To use the microscope adapter
1.Remove the microscope eyepiece.
2.Replace the original eyepiece with the custom eyepiece adapter by sliding the narrow end into place on the microscope.
Original eyepiece | Eyepiece adapter | Connection to the camera |
Figure 25. Connecting to the microscope
3. Gently push the camera into position.
FlexCam iCam Digital — Appendix |
| 23 |
|
Warranty
ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer agrees, at its option, to:
Repair or replace any defective part free of charge (except transportation charges) for a period of two years from the date the end user is invoiced for the product, provided the end user returns the product to ClearOne Communications or an authorized ClearOne dealer according to the Product Return and Repair statement set forth below;
This warranty excludes assembled products not manufactured by the Manufacturer whether or not they are incorporated in a Manufacturer product or sold under a Manufacturer part or model number.
Product Return and Repair
1.Return to Seller if Purchased Through an Authorized Dealer
a.Proof of purchase date from reseller within warranty period must be provided by the end user.
b.Seller may, at its discretion, provide an immediate exchange or repair or may return the unit to the Manufacturer for repair.
2.Return to Manufacturer
a.An RMA (return merchandise authorization) number must be issued to the end user from ClearOne technical support.
b.The end user must return the product to ClearOne with proof of purchase (showing purchase date) for a warranty claim, and display the RMA number on the outside of the shipping package.
This warranty is void if:
A.The product has been damaged by negligence, accident, act of God, or mishandling, or has not been operated in accordance with the procedures described in the operating and technical instructions; or,
B.The product has been altered or repaired by other than the Manufacturer or an authorized service representative of the Manufacturer; or,
C.Adaptations or accessories other than those manufactured or provided by the Manufacturer have been made or attached to the product which, in the determination of the Manufacturer, shall have affected the performance, safety or reliability of the product; or,
D.The product's original serial number has been modified or removed.
NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MER- CHANTABILITY OR FITNESS FOR ANY PARTICULAR USE, APPLIES TO THE PRODUCT. MANUFACTURER'S MAXIMUM LIABILITY HEREUNDER SHALL BE THE AMOUNT PAID BY THE END USER FOR THE PRODUCT. No person or entity authorized to assume any obligation or other liability in connection with the products. No action, regardless of form, arising out of or relating to the product or this warranty, may be brought by end user more than two (2) years after the cause of action has accrued.
Manufacturer shall not be liable for punitive, consequential, or incidental damages, expenses, or loss of revenue or property, inconvenience, or interruption in operation experienced by the end user due to a malfunction in the purchased product. No warranty service performed on any product shall extend the applicable warranty period.
In case of unsatisfactory operation, the end user shall promptly notify the Manufacturer at the address set forth below in writing, giving full particulars as to the defects or unsatisfactory opera- tion. Upon receipt of such notice, the Manufacturer will give instructions respecting the shipment of
Technical Services Group ~ | Technical Services Group ~ |
