24

FlexCam iCam Digital — Appendix

the product, or such other matters as it elects to honor this warranty as above provided.This warranty does not cover damage to the product during shipping and the Manufacturer assumes no responsibility for such damage. All shipping costs shall be paid by the customer.

This warranty extends only to the original end user and is not assignable or transferable.This warranty is governed by the laws of the State of Utah, without regard to the conflicts of interests provisions thereof.

ClearOne Communications Inc.

1825 Research Way

Salt Lake City, Utah 84119

FCC Part 15/ICES-003 Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules and Industry Canada ICES-003.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

Operation is subject to the following two conditions: (1) This device may not cause interference, and

(2)This device must accept any interference including interference that may cause undesired opera- tion of the device.

Changes or modifications not expressly approved by ClearOne Communications could void the user's authority to operate the equipment.

European Compliance

This equipment has been approved in accordance with Council Directive 1999/5/EC "Radio Equipment and Telecommunications Equipment". Compliance of the equipment with the Directive is attested by the application of the CE mark on the equipment.

EC Declaration of Conformity

 

 

Application of Council Directive(s):

1999/5/EC Radio equipment and Telecommunications

Terminal Equipment (R&TTE) Directive

 

Manufacturer's Name:

ClearOne Communications

Manufacturer's Address:

1825 West Research Way Salt Lake City, Utah 84119 U.S.A.

Model No.:

FlexCam iCam 910-171-101-PAL and

 

FlexCam iCam Digital 910-171-102-PAL

FlexCam iCam Digital — Appendix

 

25

 

Standard(s) to which Conformity is declared:

89/336/EEC "Electromagnetic Compatibility (EMC) Directive":

EN 55022: 1994 (Emissions)

Specification for limits and methods of measurement of

 

radio interference characteristics of information

 

technology equipment

EN 61000-3-2:1995/A1/A2:1998

Part 3: Limits - Section 2: Limits for harmonic current

 

emissions.

EN 61000-3-3:1995 Section 3:

Limitation of voltage fluctuations and flicker in low

 

voltage supply systems for equipment with rated current

 

up to and including 16 A

EN 55024: 1998 (Immunity)

Information technology equipment -

 

Immunity characteristics - Limits and

 

methods of measurement

EN 61000-4-2: 1995/A1:1998

Electrostatic Discharge

EN 61000-4-3: 1996/A1:1998

Radiated RF Immunity

EN 61000-4-4: 1995

Electrical Fast Transients

EN 61000-4-5: 1995

Lighting Surge

EN 61000-4-6: 1996

Conducted RF Immunity

EN 61000-4-11: 1994

Voltage Dips and Voltage Interruptions

73/23/EEC "Low Voltage Directive (LVD)":

 

IEC 60950-1: 2003

Safety of Information Technology

 

Equipment, Including Electrical Business

 

Equipment

We, the undersigned, hereby declare that the equipment specified above conforms to the above Directives and Standards.

Manufacturer

Legal Representative in Europe

Signature

 

Signature

Roger J. Midgley

 

Martin Offwood

 

 

 

 

 

Full Name

 

Full Name

Project Manager

 

Managing Director EMEA North

 

Position

 

Position

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Page 14
Image 14
ClearOne comm FlexCam user manual FCC Part 15/ICES-003 Compliance, European Compliance