Audio Tone | Neckloop Action |
Single High Tone | Pairing Successful |
Ring Tone | Incoming Call |
Single High Tone | End Call |
5 Rapid High tones repeated every | Battery Low |
20 seconds |
|
No Audio Indication (deteriorating | Out of Range |
audio quality) |
|
Singe Low Tone (depends on phone) | Initiate Voice Activation |
|
|
Dual HI/LOW tone if supported by | Voice tag not recognized |
the phone. |
|
5 Rapid tones repeated every 60 | No Network/Services |
seconds after the phone goes out | (handsfree profile) |
of network service for more than 20 |
|
seconds. |
|
|
|
Using your CLA7BT as a
Personal Audio Neckloop
Your ClearSounds CLA7BT can also be used as an amplified Audio Neckloop with any audio or other device that supports standard Bluetooth connections. Follow the same pairing methods as was done when pairing with a cell phone and follow the pairing instructions for your audio device. Your cell phone or audio device may need to have a connection to the CLA7BT activated when switching between devices or there can be an automatic connection, check with your various Bluetooth devices for their method of operation. Guide
