hole slots on the back of the phone. Slowly slide the phone down until it snaps into place (See figure #9).
6.Connect the handset coil cord (curly cord) to the handset and to the telephone.
7.Lift the handset and listen for a dial tone. If you hear a dial tone, your phone is ready to use. If there is no dial tone, check all your cords to make sure they are plugged in securely.
Figure #7 – Reversing The Hook | Figure #8 – Mounting The Wall Bracket |
Figure #9 – Wall Installation
SETTING THE DIALING MODE
Set the dial mode switch on the bottom of the phone to “T” if you have Touch Tone service, or “P” for Pulse dialing if you have rotary dialing service. Default is set to the “T” dialing switch mode (See figure #11).
Figure #11 – Dialing mode switch
13
