To program your one-touch memory dial buttons please follow instructions below:

1.Lift the handset.

2.Press the PROG (program) button (See figure #17).

3.Using the keypad, dial the number you would like to save, including “1” and the area code (if applicable). (See figure #18.

4.Press one of the Priority or Memory Dial buttons (M1 – M8) located on top of the phone (See figure #19). Each button can be programmed (or reprogrammed using the same procedure) for a phone number.

5.The Caller ID Screen will display <<SAVE OK>> (See figure #20).

6.To register your stored phone numbers, use the phonebook insert card located under the base.

NOTE: Numbers will be lost if the phone is not receiving any power, either through the phone line, batteries, AC adapter during a storm, power outage or if you disconnect the phone. Entering a new number in the same location will automatically erase the previous number.

Figure #17

Figure #18

Figure #19

Program Button

Telephone Keypad

Memory / Priority Buttons

Figure #20

LCD Display

NOTE: keypad is lighted for easier dialing.

If at any time you have questions about your telephone please contact our ClearSounds Customer Service Department at: 1-800-965-9043.

16

Page 16
Image 16
ClearSounds v407 user manual Figure #17