Disassembly

2 - 6 Removing the Hard Disk Drive

2.Disassembly
Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" IDE hard disk drives

with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary drivers and

utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.

Hard Disk Upgrade Process

1. Turn off the computer, and turn it over and remove the battery (page 2 - 5).
2. Remove screws - .and remove the component bay cover .
3. Remove screws - from the hard disk assembly.
4. Pull the tab upward and lift the assembly out of the computer.
5. Remove the 4 screws - to release the hard disk , from the assembly cover .
6. Reverse the process to install any new hard disk.

Figure 2

HDD Assembly
Removal
a.Remove the screws and
the bay cover.
b.Remove the screws.
c. Pull the HDD assembly
out of the bay.
d.Remove the screws and
separate the cover and
HDD.
12.Component Bay
Cover
19.HDD Assembly
Cover
20.HDD
•17 Screws
111 11
12
13 14
15 18 11
20 11
19
14
16
19
18
a.
d.
b.
c.
7
8
9
20
13
1
9
10
2 3 4
5
6
7
8
11 12
17
19