Cobra Electronics 148 NW ST specifications External Speaker External Speaker, PA Public, Address

148 NW ST manual 3.3 6/15/99 3:12 PM Page 22

Operation

Operation

External Speaker External Speaker

PA (Public Address)

PA (Public

Note

The external speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts.When the external speak- er is plugged in,the internal speaker is automatically discon- nected.

Note

Cobra external speakers are rated at 10 watts. See Accessories page 39.

The external speaker jack is used for remote receiver monitoring.

1Connect an external speaker to the external speaker jack on the rear panel.

1Connect an external PA speaker to the PA jack on the rear panel.

2Set CB/PA switch to PA position.

Address)

Note

Speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts.

Note

The speaker should be directed away from the microphone to prevent acoustic feedback.

Note

Activity on the CB channel will be heard through the PA speak- er. Adjust volume control to a normal listening level.

22 23