Rotate the On/Off Volume knob clockwise
the green RT/TX LED will be illuminated.
Operation
11
Operation
10
S-Meter

To Receive

1
To Receive
The S/RF-SWR-CAL switch must be in the
S/RF position to read the meter.
1

S-Meter

Swings proportionately to strength of incoming
signal when receiving.

The SoundTrackerTMSystem

While previous systems only “blanket out”or limit
noise in higher sound frequencies,the revolution-
ary new SoundTrackerTM System actually reduces
noise while leaving the signal intact in the recep-
tion mode. In the transmission mode,it actually
strengthens the signal,providing you with a
significant reduction in noise on reception
and transmission.

Sound clarity is measured by the ratio

of the signal level to the noise level.

The higher the signal-to-noise ratio,

the better the sound.

How SoundTrackerTMWorks

On Reception - “Cuts noise coming in”
With a normal CB,distant signals fall belo w
the squelch level and are unintelligible.With a
SoundTrackerTM CB,the noise level is cut up to
90%,which increases the signal-to-noise ratio
and dramatically improves signal clarity.This also
allows you to significantly reduce the squelch
level,which greatly expands your listening range.
OnTransmission - “Strengthens signals going out”
A SoundTrackerTM CB strengthens the transmit
signal by more effectively using the available RF
power output of the CB.The result is improved
transmission signal clarity and an expanded
transmission range.
Note
SoundTracker™ gives you
clearer,cleaner reception to
improve CB communications
while on the air.
148 NW ST manual 3.3 6/15/99 3:12 PM Page 10