Setting Dynamike

This controls the microphone sensitivity
(outgoing audio level).

ToTransmit

21

To Transmit

Setting

Dynamike

20

Transmit

RF Meter

Caution!
Be sure the antenna is properly
connected to the radio before
transmitting.Prolonged trans-
mitting without an antenna,or
a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C.Rules
and Regulations included with
this unit before transmitting.
Operation Operation
1
Selectdesired channel.
1
1
Initially,set fully clockwise so that maxi-
mum voice volume is available.Dynamike
may have to be reduced in some conditions.

Transmit

Press and holdmic button to transmit.
Transmitter is now activated.When transmit-
ting,hold the microphone two inches from
your mouth and speak in a clear,normal voice.
Release to receive.
1
The S/RF-SWR-CAL switch must be in the
S/RF position.

RF Meter

This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
148 NW ST manual 3.3 6/15/99 3:12 PM Page 20