OperationOperation
1514
RF Gain ControlRF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
Dimmer ControlDimmer Control
Controls the brightness of the front panel,signal
strength meter and channel display
Note
The RF Gain is used to optimize
reception in weak signal areas.
Rotatethe RF Gain knob counterclockwise
to reduce gain in strong signal areas.In weak
signal areas turn clockwise to increase gain.
For maximum brightness turn clockwise;
counterclockwisefor minimum illumination
1
Select mode of operation from USB to AM
to LSB
Voice Lock
USB/AM/LSB Switch
1
to Ro t ate to clar ify re ce i ve r’s f re q u e n c i e s
a bove and be l ow assigned fre q u e n c i e s.
Pri m a rily use d to tune SSB signal s as we l l
as op timizi ng A M sig nals.
1
148 NW ST manual 3.3 6/15/99 3:12 PM Page 14