Philips Update Your Speaker System for Improved Performance - www.philips.com/support

6Update firmware

To improve the performance of DS3800W,

of your DS3800W.

Please register your product at www.philips.com/welcome for information

Note

www.philips.com/support

XXXX

XXXX. zip

1On your PC/Mac, go to www.philips.com/support.

2

3

Update from the

Warning

Always connect your DS3800W to AC power for

Note

To use an Internet browser other than Apple Safari on your PC/Mac, remember to go to the Wi-Fi router

your DS3800W. See the user manual of your Wi-Fi

connected to the Wi-Fi router.

1Power on DS3800W (see ‘Prepare’ on page 10).

»It takes about 35 seconds for the unit to boot up. During boot-up, the WI-FI SETUP indicator on the back of the unit blinks green quickly.

»After boot-up, you can hear a beep and the WI-FI SETUP indicator turns to green steadily. DS3800W is

network automatically.

2Make sure that DS3800W and your PC/Mac are connected to the same Wi-Fi router.

3Open Apple Safari on your PC/Mac, then select ‘Philips_Fidelio XXX’ from the Bonjour pull-down list.

Or open any other Internet browser on your PC/Mac, then type in the IP address of DS3800W (available on

at the address bar.

»

web page is displayed.

22EN