Follow these steps to get your Diverse 3010 Micro ready for use

Note

Your handset is already “registered” to the Diverse 3010 Micro base station.

Note

Plan where you will put your Diverse 3010 Micro. It should be within two metres of a power socket and the phone socket.

UP

 

SETTING

1 Connect the power cable

 

Plug the power cable into the power socket on the underside of your Diverse 3010 Micro. The power cable connector is coloured red. Please take care that the telephone cord and power cable plugs are connected to the correct socket as incorrect placement could damage the base station.

Red socket

Note

Ensure that the telephone line cord and the power supply are plugged into the correct socket.

2Plug the 3 pin adaptor into a mains power socket and switch on

Note

Use only the power adaptor

C39 280-Z4-C174/..–C67 with your Diverse 3010 Micro.

6

Page 10
Image 10
BT 3010 manual Connect the power cable