Using Caller Display and Call Waiting

CALLER DISPLAY

BT’s Caller Display and Call Waiting

If you subscribe to Caller Display you can see who is calling you (on your handset display). If you are on a call and you also subscribe to BT’s Call Waiting service, the second incoming call number will appear on the handset display and you will hear an intermittent beep through the handset. This is to alert you to another caller waiting to speak to you.

With BT’s Caller Display and Call Waiting service, your Diverse base station receives caller information which is transmitted over the BT network. This includes the date and time of the call.

With the Micro handset, the screen shows the caller’s number (if it has been sent) when the phone rings. If you have stored a name to go with the number in your handset directory, the name will be displayed instead.

To take the call waiting

RPress the RECALL button. Your 1st caller is put on hold whilst you speak to your 2nd caller.

To speak to your 1st caller again you can either:

RPress the RECALL button again and you will be reconnected to your 1st caller, your 2nd caller will be put on

Rhold. You can use the RECALL button to toggle between the two callers.

Or

Press the RED PHONE button to end the conversation with the caller you are currently speaking to. The handset will ring again.

Press the GREEN PHONE button and you will be reconnected to the caller who was on hold.

24

Page 28
Image 28
BT 3010 manual Using Caller Display and Call Waiting, BT’s Caller Display and Call Waiting, To take the call waiting