34
Note
The barred or enabled numbers must be
switched on before you can use this.
WARNING
You cannot dial 9 999or R 999 from
behind a switchboard when call barring
is set.

Directory for barred/enabled

numbers

To: Bar numbers.
Enable handsets to call
only specified numbers.
Create a memory list.
Press the INT button.
Press the SET button.
Press the 0button then press
the 1button.
Press the OK button.
Enter the base station PIN
(original setting
0000
).
Press the OK button. Display
shows the first location.
01 1 _
_
_
Blank (or previously
stored numbers.
Memory location (1-5).
Function number
entered previously.
CallRe striction
INT
SET
OK
OK
0
1
KEYPAD
Press the UP/DOWN buttons
if necessary to scroll to the
location you want
1-5
.
Press the OK button.
Enter the number you want to
bar, enable or change. Press
the DELETE button to delete
digits.
Press the OK button to
confirm.
Press the RED PHONE button
to return to standby.
OK
OK

To switch call barring/call

enabling on and off

Once you have set the
numbers you want, you can
then switch call barring/
enabling on or off at any time
(see below). You can do this
from any handset registered to
the base station.
Press the INT button.
Press the SET button.
INT
SET
SECURITY