2Shortly after step 1, press Wi-Fi SETUP on the back of DS3800W.
»The Wi-Fi SETUP indicator blinks red, yellow and green alternately.
»Within 2 minutes, the WI-FI SETUP indicator stops blinking and stays green, and the unit beeps.
»DS3800W is connected to your home Wi-Fi network successfully.
Tip
For some Wi-Fi routers, you may need to hold the WPS button for Wi-Fi connection or enable the WPS
If the Wi-Fi SETUP indicator on DS3800W blinks yellow, it means that the Wi-Fi connection has failed. Please wait for 2 minutes and try again. If the problem remains, try to set up the Wi-Fi connection manually (see ‘Scenario 2: Connect to a non-WPS router’ on page 12).
If the Wi-Fi connection fails again, press and hold both the + and - buttons on the top of DS3800W to reset it, and then try again.
Scenario 2: Connect to a non-WPS router
Note
You can also follow the procedures below to connect DS3800W to a WPS router manually.
To connect DS3800W to a Wi-Fi router manually, you need access to DS3800W’s
its internal Wi-Fi settings.To do so, you need a Wi-Fi enabled device with an Internet browser for temporary Wi-Fi connection to DS3800W.
The Wi-Fi enabled device can be an iPod touch/ iPhone/iPad or a Wi-Fi enabled PC/Mac.
Follow the sequence below for connection of DS3800W to a non-WPS Wi-Fi router.
1Collect settings of your home Wi-Fi router and write down on paper for use during DS3800W Wi-Fi setup (see ‘Collect settings of your home Wi-Fi router’ on page 13).
2Switch DS3800W to Assisted Wi-Fi Setup mode (see ‘Switch DS3800W to Assisted Wi-Fi Setup mode’ on page 13).
»A new Wi-Fi network created by DS3800W will appear, with the network name (SSID) of Philips Fidelio AirPlay.
3Connect your Wi-Fi enabled device to the created new Wi-Fi network temporarily (see ‘Connect your Wi-Fi enabled device to the newly created Wi-Fi network’ on page 14).
4Open the built-in web page of DS3800W with the Internet Browser of your Wi-Fi enabled device (see ‘Open the built-in web page of DS3800W’ on page 15).
5Change the internal Wi-Fi settings of DS3800W based on the settings you wrote on paper at step 1 (see ‘Change the internal Wi-Fi settings of DS3800W’ on page 16).
