Cobra Electronics CP-2525 Caller ID CONT’D Caller ID LOG, Making a Call from the Caller ID LOG

CALLER ID (CONT’D)

THE CALLER ID LOG

The Caller ID log can store 30 names and numbers. When it becomes full, the oldest will be deleted as new calls are received. You can store an entry from the log into the Electronic Directory (please see Electronic Directory section for instructions).

To review Caller ID log entries, press either the Scroll up or down button. Scrolling up will move you up the list from 1 (newest) to 30 (oldest). Scrolling down will move you down the list from 30 (oldest) to 1 (newest).

Use the Ò✱Ò and Ò#Ó buttons to scroll left and right if the complete name or number does not appear in the display.

To exit the log, press the OFF button.

MAKING A CALL FROM THE CALLER ID LOG

You can make a call automatically from the Caller ID log. Scroll to the desired entry and press the TALK button. ÒTALKÓ will appear in the display. The phone will automatically dial the number shown.

IMPORTANT NOTE: Caller ID data includes an area code even if the call originates within your local calling area. Since the area code should not be used for dialing if the number shown is within your area code, press the Loc Call button rather than the TALK button. The phone will not dial the area code.

SPECIAL CALLING SITUATIONS

If your telephone company requires a “1” to be dialed before the main number for a local call: Scroll to the desired entry and press the EDIT button. The cursor will flash at the beginning of the phone number line. Press the “1” keypad button. Press the TALK button. The phone will automatically add “1” to the called number.

If you need to change the telephone number: The phone number may have changed since it was first entered into the Caller ID log. To change it, scroll to the desired entry and press the EDIT button. The cursor will flash at the beginning of the phone number line.

To move the cursor to the right, press the Ò#Ó keypad button until the digit to be changed is ßashing. Press the DELETE button, the digit will disappear and the digit to its right will take its place. Press the keypad button for the new digit. Press the TALK button to begin dialing.

To end the call, press the OFF button.

DELETING AN ENTRY IN THE CALLER ID LOG

Upon receipt of the 31st call, the oldest entry will be deleted.

To manually delete any entry:

1.Scroll up or down to reach the entry to be deleted.

2.Press the DELETE button. The display will show DELETE?

3.Press the DELETE button again.

To manually delete all entries:

1.Press either the scroll up or down button.

2.Press the DELETE button for more than two seconds. The display will show

DEL ALL?

3.Press the DELETE button again.

To cancel the delete operation, press the OFF button before pressing the DELETE button for the second time. To return to standby mode, press the OFF button.

CHANNEL SELECTION

25 selectable channels are built into your Cobra Intenna for optimum interference-free use.

If interference begins during a conversation:

¥ Press and release the CHANNEL button on the handset. Your phone will automatically scan and advance to the next clear channel.

¥ If an alert tone (3 beeps) sounds, channel change was unsuccessful. In that case, move closer to the phone base and press CHANNEL button again.

COMPANDER NOISE REDUCTION

Your Cobra Intenna has the Cobra Clear Call¨ PLUS compander noise-reduction system to minimize background noise for optimum audio performance. The sound of your phone will be comparable to the performance of a corded phone.

DIGITAL SECURITY

Your Cobra Intenna features 65,000 combinations of digital security coding (in accordance with FCC regulations) to reduce the chance of interference from your neighborsÕ cordless phones. These inaudible, electronic codes are transmitted automatically by your phone to establish a secure link between your cordless handset and base.

11 12