Cobra Electronics CP-2525 operating instructions Electronic Directory CONT‘D

ELECTRONIC DIRECTORY

Your Cobra Intenna cordless phone enables you to store thirty names and numbers in an electronic directory. These directory memories are in addition to the thirty Caller ID memories. Any memory from the electronic directory can be automatically dialed.

To store a name and number from the keypad:

1.Press the EDIT button.

2.Enter the phone number using the handset keypad. A maximum of 16 digits can be entered.

3.Press the SCROLL up button to begin entering the name. If you do not want to enter a name, skip to step #5.

4.Keypad buttons are used enter the name.

NOTE: Each button can be used to enter the upper and lower case letters shown on the button. The Ò1Ó, Ò0Ó, ÒCHANNELÓ, Ò✱Ò, Ò#Ó buttons can

also enter speciÞc symbols as shown in Table 1. A maximum of 15
characters per name can be entered.
EXAMPLE: Enter Ed Jones
	1.)	Press Ò3Ó twice. ÒEÓ will appear.
	2.)	Press Ò#Ó to move the cursor one space to the right
	3.)	Press Ò3Ó four times. ÒdÓ will appear.
	4.)	Press Ò#Ó.
	5.)	Press Ò0Ó twice for a blank space.
	6.)	Press Ò#Ó.
	7.)	Press Ò5Ó once. ÒJÓ will appear.
	8.)	Press Ò#Ó and Þnish entering Òo-n-e-sÓ using the
	procedures above.
				TABLE 1
Number of times key is pressed during character entry
Key	1	2	3	4	5	6	7	8	9
1	&	'	(	)	,	-	.	/	1
ABC 2	A	B	C	a	b	c	2
DEF 3	D	E	F	d	e	f	3
GHI 4	G	H	I	g	h	i	4
JKL 5	J	K	L	j	k	l	5
MNO 6	M	N	O	m	n	0	6
PQRS 7	P	Q	R	S	p	q	r	s	7
TUV 8	T	U	V	t	u	v	8
WXYZ 9	W	X	Y	Z	w	x	y	z	9
OPER 0	0	Blank
channel	*	#

*To move the cursor to the left

#To move the cursor to the right

13

ELECTRONIC DIRECTORY (CONT‘D)

5.Press STORE. The display will show LOCATION?

6.Enter a location number (01 to 30).

a.) If the location has not been used, the display will show STORE? Press the STORE button. The display will show STORED.

b.) If the location is in use, the display will show REPLACE?

1.) If you do want to replace it, press the STORE button. The display will show REPLACED.

2.) If not, select another location number and press STORE. The display will show STORED.

7.The phone will automatically revert to Standby mode in a few seconds.

To store a name and number from the Caller ID log:

1.Locate the desired log entry using the SCROLL buttons.

2.Press the EDIT button.

3.Press STORE. The display will show LOCATION?

4.Enter a location number (01 to 30). If the location has not been used, the display will show STORE? Press the STORE button. The display will show STORED. If replaceing an existing directory entry, please go to step #6b above.

5.The phone will automatically revert to Standby mode in a few seconds.

To change a directory memory:

1.Press the Memory button. The display will show LOCATION?

2.Either enter a the location number (01 to 30) or use the SCROLL up and down buttons to Þnd the entry that you want to change. The display will show the memory entry.

3.Press the EDIT button. The Þrst digit of the number will ßash. If you do not want to change the telephone number, press the SCROLL up button (the Þrst letter of the name will ßash) and go to step #8.

4.Change the telephone number by using the Ò#Ó and Ò✱Ò buttons to move the cursor to the digit(s) requiring change. Once at the digit, press the DELETE button.

5.Press the new digit on the keypad. The display will show the new telephone number.

6.Repeat step #5 for as many digits as necessary.

7.A.) If you are now Þnished, go to step #8.

B.) If you also want to change the name, press the SCROLL up button. The Þrst letter of the name will ßash. Repeat steps #4 through #6 to change the characters in the name.

14