![](/images/new-backgrounds/1309034/30903423x1.webp)
Cordless Telephone
Troubleshooting Guide
If your cordless phone does not seem to operate properly, please check the following and refer to the appropriate sections in this booklet for detailed information:
•The phone is dead; no indicator lights are on: Are the power adapter and telephone cord connected?
•Handset beeps during conversations or when away from the base: The batteries need recharging; return the handset to the base for overnight recharging.
•Hearing poor audio or added interference during calls: DonÕt cover the top section of the handset with your hand or rest the phone on your shoulder. This blocks the special internal Cobra Intenna handset antenna.
•Handset disconnects, loses performance and/or beeps three times when in use away from the base: You may be out of range or your batteries may need recharging. Move closer to the base and/or recharge batteries.
•Unable to make a call due to interference: Select a new channel.
•Handset won’t work after a power outage or after disconnecting phone from AC power and then reconnecting it: Return the handset to the base for about 15 seconds to automatically match the security coding.
•Handset seems “dead”: Battery power has run out; return handset to base and charge for at least 12 hours. If handset still seems dead, unplug the handset battery for 15 seconds and plug back in and then place the handset back on the base for at least 5 minutes. Check that charge LED lamp is illuminated.
•Power Failure Reset: Power Protectorª Circuitry will preserve the codes set in the handset and base, however, if the battery in the base is low in power, you must return the cordless handset to the base for about 15 seconds. This automatically matches the digital security codes.
•Caller ID does not work properly: Make sure you have subscribed to Caller ID service from your telephone company. Check to see if messages shown in the display correspond with those on page 10.
•Caller ID works properly but does not display information from a second caller: Make sure you have subscribed to Call Waiting and conÞrm that your telephone company provides Caller ID during Call Waiting.
For technical assistance, please call our Automated Help Desk which can assist you by answering the most frequently asked questions about Cobra products.
(773) 889-3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached through this same
number 8:00 am - 8:00 pm, Monday through Friday, CST.
Technical assistance is also available
Question (FAQ) section at www.cobraelec.com or by
productinfo@cobraelec.com
IF YOU THINK YOU NEED SERVICE CALL 1-773-889-3087
“If your product should require factory service please call Cobra first before sending your unit in. This will ensure the fastest
You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following in order to have the product serviced and returned.
1.For Warranty Repair include some form of
2.Send the entire product. For exampleÑmust include base, handset, cords and power adapter furnished with the product.
3.Enclose a description of what is happening with the unit. Include a typed or clearly printed name and address of where the unit is to be returned.
4.Pack unit securely to prevent damage in transit. If possible, use the original packing material.
5.Ship prepaid and insured by way of a traceable carrier; such as United Parcel Service (UPS) or First Class Mail; to avoid loss in transit to Cobra Factory Service, Cobra Electronics Corporation, 6500 W. Cortland St., Chicago, IL 60707.
6.If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call
REGISTERED WITH THE FCC
Please note: This cordless telephone operates under part 15 and part 68 of FCC rules.
Operation is subject to two conditions: 1) It may not interfere with radio communications, and 2) It must accept any interference received, including that which may cause undesirable operation. See the Operational Features section of this booklet for ways to reduce interference.
Your telephone company is required by the Federal Communications Commission to allow you to connect FCC registered telephones to their lines.
The FCC requires you to provide information, if requested by the local telephone company, about the connection of an FCC registered telephone to their lines. They may ask you for the FCC registration number and ringer equivalence number (REN), both of which are on the bottom of the base. They may also ask for the Universal Service Order Code (USOC) number which is
21 | 22 |