Cobra Electronics FRS307 Using VOX Mode, Setting the VOX Sensitivity Level, Press the Talk button

O P E R AT I O N ENGLISH

ENGLISH O P E R AT I O N

Using VOX Mode

In VOX mode, your microTALK® can be used "hands-free," automatically transmitting when you speak. To turn VOX mode on and off:

1. Press the MODE button until the VOX icon

flashes and the current setting ("on" or

Setting the VOX

Sensitivity Level

You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To set the sensitivity:

Programming Memory

Locations

Your microTALK® radio has 10 memory locations (0-9) for storing your most frequently used channels and privacy codes. To program locations:

5.Press the MODE button again to store the main channel in memory and move to privacy code selection. The privacy code number begins flashing and the Memory icon continues to flash.

MODE button

"off") is displayed.

MODE button

2.Push the CHANNEL SELECT button up or down to turn VOX mode on or off.

1.Press the MODE button until the VOX icon flashes and the number for the current sensitivity level is displayed next to the letter L (level 5 = most sensitive, level 1 = least sensitive).

MODE button

1.Push the MODE button until the Memory icon and the memory location flashes.

2.Select the memory location you wish to change by pushing the CHANNEL SELECT button up or down.

MODE

button

CHANNEL SELECT

button

6.Select the privacy code (0-38) you wish to store by pushing the CHANNEL SELECT button up or down.

7.Press the TALK button

to transmit on your	TALK
selected channel and	button

CHANNEL	CHANNEL
DOWN
	UP

3.Press and release the LOCK button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.

2.Push the CHANNEL SELECT button up or down to change the setting.

CHANNEL	CHANNEL
DOWN	UP

3.Press and release the

MODE button again. The Memory icon and the main channel number will flash.

MODE button

privacy code, which

will be stored into

the memory location

you are using.

8. Press and release the LOCK button to

return to Standby mode at your new

memory location, or press and release the

MODE button to save the memory location

LOCK button

MODE button

3.Press and release the LOCK button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.

4.Select the main channel you wish to store by pushing the CHANNEL SELECT button up or down.

and proceed to other functions.

LOCK	MODE
button	button

7 8