Cobra Electronics FRS307 Using the Scan Function, Location, press the Mode button, Main channels

CHANNEL SELECT button

LOCK button

O P E R AT I O N ENGLISH

ENGLISH O P E R AT I O N

Recalling Memory Locations To scan main channels:

Using the Scan Function

b) Push the CHANNEL SELECT button up or

To recall a channel you have stored in a memory location:

1.Press the MODE button until the Memory icon and a memory location flashes.

MODE button

2. Select your desired memory location by pushing the

CHANNEL SELECT button up or down. Press the LOCK

button to enter your selection. To

go on to the next function without selecting a memory

location, press the MODE button.

1.Press the MODE button until the Scan icon and main channel number flashes.

MODE button

2. Push the CHANNEL SELECT button up

or down and the unit will begin scanning

the main channels. (NOTE: The unit

“ignores” privacy codes while scanning

main channels.)

3. The radio will continue to scan all main

channels and stop if an incoming

transmission is detected. The unit will

remain on that channel for 10 seconds.

During that time you can:

a) Press and hold the TALK button and

talk. The radio will remain on that

channel and return to Standby mode.

b) Push the CHANNEL SELECT button

(continued)

To scan privacy codes:

1.While in Standby mode, press the CHANNEL SELECT button up or down to choose the main channel you wish to scan.

CHANNEL SELECT button

2.Press the MODE button until the Scan icon and the privacy code number flashes.

MODE button

3.Push the CHANNEL SELECT button up or down and the unit will begin scanning privacy codes within the main channel you selected.

down to resume scanning privacy codes.

c) Press the MODE button to proceed

to memory location scanning.

	MODE button
TALK button	CHANNEL SELECT
	button

If you do not press any button within 10 seconds, the radio will automatically resume scanning privacy codes.

To scan memory locations:

1.Press the MODE button until the Scan icon, Memory Location icon and memory location number flashes.

MODE button

3.Repeat steps 1 and 2 to recall other memory locations.

Using the Scan Function

Your microTALK® radio can automatically scan main channels (1-14), the privacy codes (0-38) within one main channel, or memory locations.

up or down to resume scanning main

channels.

c) Press the MODE button to proceed

to privacy code scanning (see following

page).

If you do not press any button within 10 seconds, the radio will automatically resume scanning main channels.

4.The radio will continue to scan privacy codes and stop if an incoming transmission is detected. The unit will remain on that code for 10 seconds. During that time you can:

a)Press and hold the TALK button and talk. The radio will remain on that channel and privacy code, then return to Standby mode.

2.Push the CHANNEL SELECT button up or down and the unit will begin scanning memory locations.

CHANNEL	CHANNEL
DOWN	UP

9 10