Introduction | Operation | Customer Assistance Warranty |
Set CTCSS Privacy Codes
•
Mode Button
CTCSS Privacy Code |
Channel Buttons
To select a CTCSS privacy code:
1.After selecting a channel, press the
Mode button until the CTCSS icon appears and the small numbers flash on the display (01 through 38).
NOTE
If DCS is turned on at the channel selected, the display will flash the CTCSS icon and “OFF.” To switch from DCS to CTCSS, press the Channel Up or Channel Down button while the display is flashing “OFF.” The display will then show the small numbers flashing and you will then be able
to proceed to step 2.
2.Press using the Channel Up or Channel Down button to select a CTCSS privacy code. You can hold the Channel Up or Channel Down button for fast advance.
3.When your desired CTCSS privacy code is displayed, choose one of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
9