3. Release the Talk button when you are finished talking and listen for a response.
You cannot receive incoming calls while pressing the Talk button.
Both radios must be tuned to the same channel/privacy code to communicate.
Auto Battery Save
Your microTALK radio has a unique circuit designed to extend battery life. If there are
no transmissions for 10 seconds, the radio will automatically switch to Battery Save mode and the Power Saver icon will flash in the display.
This will not affect the radio’s ability to receive incoming transmissions.
Communicating with Another Person 1. Press and hold the Talk button.
2. With the microphone about 2 inches (5 cm) from your mouth, speak in a normal voice.
Press and hold the Power button until you
hear a series of audible tones indicating the radio is on.
Your microTALK radio is now in Standby mode, ready to receive transmissions. The radio is always in Standby mode, except when the Talk, Call, Mode or Power buttons are pressed.
Battery Low
•
When battery power is low, the Battery Low icon will blink. Your batteries should be recharged.
Turning on Your microTALK Radio
•
•
•
Customer Assistance Warranty
|
|
|
|
|
|
| Introduction | Operation |
|
|
|
On/Off Power
Battery Low
Battery Save Mode
Talk Button
2 Inches (5 cm) from Mouth
3
