Customizing the MR F300
Operating Your Handset
NOTE
If corrections are needed before saving the entry, press the Left or Right Arrow Function button to move the cursor to the character that is to be
Customizing the MR F300
Operating Your Handset
Settings
The Settings option on the Menu provides access to the remaining functions needed to customize your handset.
changed and press the Delete Function button to remove that character. Then scroll the list to select the correct character.
NOTE
A “double click” on the Delete Function button will remove the entire entry and return the cursor to the initial position after Name.
Settings Menu
VOLUME
DISPLAY
VOX
RING TONES
KEY TONE
BT REGION SET
To access these functions, select the Settings option from the Menu to arrive at the screen shown.
The Settings options list appears on the screen. The complete list is:
■ | Volume | ■ | Display |
■ | VOX | ■ | Ring Tones |
Phonebook Edit
NAME : BILL ANDERSON
NUMBER: +1 555 566 1234
DEL SAVE
To Edit an Existing Name or Phone Number:
1. | Select Phonebook from the Menu function, scroll down to |
| name or number to be edited and press the Edit Function |
| button to arrive at the screen shown. |
2. | Use the Right and Left Arrow Function buttons to move |
| the cursor to the character(s) to be changed and proceed |
| as described for making corrections when entering a new |
| name or number. |
Volume
■ Key Tones | ■ BT Region |
■Exit
Once the pointer at the left of the screen is positioned at the option you want, press the Enter button to select it and advance to its screen.
3. Press the Save Function button to save the changes or |
deletion and go back to the Phonebook function. |
This volume adjustment can be performed on the internal speaker in the handset either from Standby mode or during a call.
PA Output
Adjust Handset Volume
To Adjust the Handset Volume:
If, during installation, you have connected the CobraMarine Bluetooth handset connection cable to your vessel’s stereo AUX input, you can allow the handset to be used as a public address microphone.
VOLUME ADJUST
DOWN | UP | SAVE |
1. | Select Volume from the Settings function to arrive at the |
| screen shown. |
2. | Press the Up or Down Arrow buttons or the Up or Down |
| Function buttons to adjust the speaker volume. The bar |
Enable Use of
Auxiliary Speakers
PA OFF
ON OFF
To Enable Use of Auxiliary Speakers:
1.Select PA Output from the Menu function to arrive at the screen shown.
2.Press the On or Off Function button to toggle between On and Off condition.
graph will show the level you have set. |
3. Press the Enter or Save Function button to save the |
volume setting and return to Settings function. |
18 English
Nothing Comes Close to a Cobra® 19
