Getting Started
Operating Your Handset
Getting Started
•
Refer to the foldout at the front of this manual to identify the various controls and indicators on your Bluetooth handset.
Most button functions are activated by a momentary press, then release. In those cases that call for “press and hold,” hold the button down for at least two seconds after it is pressed. The PTT button is held down as long as you are speaking into the microphone.
When using the handset, tones will sound to:
■Indicate an error – three beeps.
■Confirm an action – two beeps.
■Confirm a single button press (except the PTT button) – one beep. You can turn the Key Tones Off if you want (see page 22).
Try It Out
Using the Bluetooth handset is the most effective way to learn about it. Don’t hesitate to explore functions and add entries to see how they work. Do not be concerned if you make mistakes. They can all be undone in Edit mode. Or you can reset the unit to the original factory default condition. Push and hold the Green Phone and Home function keys, then push the Power key until the unit turns On.
NOTICE
Resetting the unit will clear ALL Bluetooth device pairings as well as the Call Log, Phonebook and Bluetooth device list.
6 English
Common MR F300 Functions
Operating Your Handset
Common MR F300 Functions
•
The following procedures define common operating functions of the handset.
Power On/Off
Press the Power button at the top of the handset for two seconds to turn it On or Off.
The first time you turn On the CobraMarine Bluetooth handset you will see a message that the unit is ready for pairing with a cell phone. The message also provides a password. If you do not want to pair a device right away, press the Escape button to go to Standby mode.
When the unit is subsequently turned On, it will search for the currently selected Bluetooth device and go to Standby mode.
Mode
This button serves two functions:
■To change the mode of operation between the Bluetooth handset and your cell phone itself.
■To switch voice activation of the microphone between On and Off. Turn VOX On if you want to operate in a
Mode
Normal operation of the CobraMarine Bluetooth handset uses its internal microphone and speaker to conduct conversations during a call. However, there may be times you want to suspend the Bluetooth pairing and continue part or all of the call on your cell phone itself.
To Change Between Handset and Cell Phone Modes:
1.Press the Mode button to switch the call to your cell phone.
2. Talk and listen to your cell phone in the usual way. The handset will be inactive.
3.Press the Mode button to restore operation to the handset.
4.Talk and listen to the call on the Bluetooth handset.
Nothing Comes Close to a Cobra® 7
