Operating Your Radio
Call Tone Select
Setup Mode Programming
Call Tone Select
Setup Mode Programming
Operating Your Radio
Weather (WX) Mode Programming
GMRS
R VHF
T X
A
B U I C
ATIS VOX LOMEDHISAMEMEM
Roger Beep Mode
GMRS
TRX VHF
A
B U I C
ATIS VOX LOMEDHISAMEMEM
Key Tone Mode
GMRS
R VHF
T X
A
B U I C
ATIS VOX LOMEDHISAMEMEM
This setting will also allow you to transmit a unique Call Tone alert to identify your radio when you transmit messages. You can select from one of 10 different Call Tone signals.
To Set Call Tone:
1.From the previous press of the Call/Enter/Setup button, the matrix will display CALL TONE SELECT and the display will flash the current Call Tone number (01 through 10).
2.Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds.
3.Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.
NOTE
Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for your unique communication needs. It is only compatible with other Cobra VHF radios.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1.Display will show ROG icon flashing and the matrix will display ROGER BEEP ON or OFF.
2.Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On.
3.Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting.
To Set Key Tone On or Off:
1.Display will show Key Tone icon flashing and matrix will display KEY TONE ON or OFF.
2.Press Channel Up/Down button to select ON or OFF.
3.Press Call/Enter/Setup button to save entry.
Weather Alert Standby
R | GMRS |
VHF | |
T X |
|
A |
|
B U I C |
|
ATIS VOX LOMEDHISAMEMEM | |
WX Alert On/Off |
|
R | GMRS |
VHF | |
T X |
|
A
B U I C
ATIS VOX LOMEDHISAMEMEM
Programming these features will allow your radio to listen to all NOAA Hazard Alert radio channels.
Start from WX Alert Standby mode to begin WX Alert Setup programming. Press and hold the Call/Enter/Setup button for two (2) seconds to enter the programming mode.
To Set WX Alert On or Off:
1.WX Alert mode is the first mode that begins
WX Alert Setup programming. From the WX Standby mode, press and hold the Call/Enter/Setup button to enter the Weather mode programming.
2.Display will show WX Alert icon and flashing matrix will display WX ALERT ON or OFF.
3.Press Channel Up/Down button to select ON or OFF.
4.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.
20 English
Nothing Comes Close to a Cobra® 21
