MODE FUNCTIONS |
|
OPERATION | English |
To Set the VOX Sensitivity Level:
1. Press the MODE button until |
| Mode Button |
|
| |||
the VOX icon flashes and |
|
|
|
the current sensitivity level |
|
|
|
is displayed. |
|
|
|
The current sensitivity level is |
|
|
|
|
|
| |
displayed with the letter “L” |
| Select VOX |
|
| Sensitivity Level |
| |
and a number 1 to 5, 5 being |
|
| |
|
|
| |
the most sensitive level and 1 |
|
|
|
being the least sensitive level. |
|
|
|
2. Press the CHANNEL UP or |
|
|
|
CHANNEL DOWN button to |
| Channel Buttons |
|
change the setting. |
|
|
3.When your desired VOX sensitivity level is displayed, choose one of the following:
a.Press the MODE button to enter the new setting and proceed to other functions.
b.Press the LOCK button to enter the new setting and return to LISTENING MODE.
c.Do not press any buttons for fifteen (15) seconds to enter the new setting and return to LISTENING MODE.
Channel Scan
Your microTALK® radio can automatically scan channels (1 to 8).
NOTE: The radio ignores specific CTCSS privacy codes while scanning channels.
To Scan Channels:
During An Incoming Transmission, You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that channel. Your radio will remain on that channel and return to
LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning channels.
If you press the TALK button while scanning and not within ten (10) seconds of receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to LISTENING MODE.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning channels.
During Scanning (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE.
b. Press the MODE button to proceed to set CTCSS privacy code on the channel that was either displayed before you entered Mode
Functions or on which, during scanning, you last received a transmission (see “CTCSS Privacy Code Scan” for further details).
c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the
1.Press the MODE button until the Scan icon and the channel number flash on the display.
2.Press the CHANNEL UP or CHANNEL DOWN button to begin scanning channels.
The Scan icon will continue to be displayed when channel scan is On. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for ten (10) seconds.
Mode Button
Select Scan Channels
Channel Buttons
channel on which, during scanning, you last transmitted or received.
CTCSS Privacy Code Scan
Your microTALK® radio can automatically scan the CTCSS privacy codes (01 to 38) within one (1) channel.
To Scan Privacy Codes:
1. While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan the CTCSS privacy codes.
2. Press the MODE button
While setting channel scan, if you do not press any buttons for fifteen (15) seconds your radio will automatically return to LISTENING MODE on the channel or channel/privacy code displayed before you entered Mode Functions.
until the Scan icon and the small numbers next to the channel number flash on the display.
3. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the channel you selected.