Mode Functions
Operation
VibrAlert® and Call Tones
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
•
Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are
Mode/Lock Button
To change call settings:
VibrAlert® + Ring
finished talking and it is OK for them to speak.
Channel Buttons
1. | Press the Mode/Lock |
| button until the Call Setting |
| icon flashes on the display. |
| The current setting (“01” |
| vibrate + ring, “02” vibrate |
| only or “03” ring only) |
| is displayed. |
2. | Press the Channel Up or |
VibrAlert® Only
Mode/Lock Button
Roger Beep On
To turn roger beep on or off:
1.Press the Mode button until the Roger Beep icon flashes on the display. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to select roger beep on or off.
3.Choose one of the following:
Channel Down button to |
change the call setting. |
3. Choose one of the following: |
Ring Only
a. Press the Mode/Lock button to enter
Channel Buttonsthe new setting and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the
a. Press the Mode/Lock button to enter the new setting and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the new setting and return to Standby mode.
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit a unique call alert.
new setting and return to Standby mode.
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.
Mode/Lock Button To change keystroke tones:
1.Press the Mode/Lock button until the Keystroke Tones icon flashes on the display. The current on or off setting is displayed.
Mode/Lock Button
Call Tone Setting
To change a call tone setting:
1.Press the Mode button until the letter “C” and the current call tone number (01 through 10) is displayed.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one of the following:
Keystroke Tones On 2. Press the Channel Up or Channel Down button to turn keystroke tones on or off.
| 3. Choose one of the following: |
| a. Press the Mode/Lock button to enter the |
| new setting and return to Standby mode. |
Channel Buttons | |
| b. Press the Enter/Hi•Low button to enter the |
| new setting and return to Standby mode. |
| a. Press the Mode/Lock button to enter the |
| new setting and proceed to other functions. |
Channel Buttons | |
| b. Press the Enter/Hi•Low button to enter the |
| new setting and return to Standby mode. |
|
|
18 English
Nothing comes close to a Cobra® 19
