Mode Functions
Operation
NOAA* All Hazards Radio Channels
•
You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK radio can be used
Mode/Lock Button
Hazards Radio Icon
To listen to All Hazards Radio channels:
1. | Press the Mode/Lock button until the |
| All Hazards Radio icon, the currently |
| selected All Hazards Radio channel, |
| and signal strength are displayed. |
2. | Use the Channel Up or Channel Down |
sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.
Mode/Lock Button To turn VOX mode on or off:
1. Press the Mode/Lock button until the VOX icon flashes on the display. The current on or off setting is displayed.
Channel Buttons |
button to change All Hazards Radio channels. |
3. The All Hazards Radio icon will continue to |
be displayed when All Hazards Radio is on. |
Choose one of the following: |
a. Press the Mode/Lock button to proceed |
to other functions. |
b. Press the |
All Hazards Radio channel mode and |
return to Standby mode. |
c. Press Talk button to exit and start on |
last used transmitting channel. |
*National Oceanographic and Atmospheric Administration
VOXIcon |
Channel Buttons |
Mode/Lock Button
VOX Sensitivity Level |
Channel Buttons |
2.Press the Channel Up or Channel Down button to turn VOX on or off.
3.Choose one of the following:
a.Press the Mode/Lock button to enter the selected on or off setting and proceed to other functions.
b.Press the Enter/Hi•Low button to enter the selected on or off setting and return to Standby mode.
To set VOX sensitivity:
1.Press the Mode/Lock button until the VOX icon flashes and the current sensitivity level is displayed.
The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one of the following:
a. Press the Mode/Lock button to enter the selected setting and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the selected setting and return to Standby mode.
|
|
|
|
10 | 11 | ||
