Communicating with Another Person | Cobra Electronics Two-Way Radio

Using Your Radio

Operation

Talk Button

Two Inches (5 cm) from Mouth

Communicating with Another Person

1.Press and hold the Talk button.

2.With the microphone about 2 inches (5 cm) from your mouth, speak in a normal voice.

3.Release the Talk button when you are finished talking and listen for a response.

You cannot receive incoming calls while pressing the Talk button.

Both radios must be tuned to the same channel/privacy code to communicate.

•

Channel Buttons

Channel Number

Channels

•

With the radio on, select any of the 22 channels by pressing the Channel Up or Channel Down button.

Both radios must be tuned to the same channel to communicate.

Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.

See page 21 for FRS/GMRS frequency allocations and compatibility charts.

Listening	Listening for a Response	•
		•

Release the Talk button to receive incoming transmissions. Your microTALK radio is always in Standby mode while the Talk or Call buttons are not pressed.

4

Image 10

Cobra Electronics Two-Way Radio manual Communicating with Another Person, Press and hold the Talk button, Channels

Contents

Nothing Comes Close to a Cobra English PR4100WX Automated Help Desk Making Life Easier and SaferFor Assistance in Canada or the U.S.A Customer Assistance Operators Product Features 14 12 Backlit LCD DisplayPage Caring for YourmicroTALKRadio Replace battery compartment cover and belt clipEstimated operation time on full charge 12 hours For charging microTALK radios in desktop charger Using Your RadioPlug 120-volt adapter into electrical outlet Replaced if using alkaline batteries On your radio and adjust the volumeBattery Low Turning on Your microTALK Radio Press and hold the Talk button Communicating with Another PersonChannels Selectable HighLow Power Output VolumeRotate the On/Off Volume knob Call Button To alert another person that you are calling To turn maximum range extender on To turn the lock feature on or offTo briefly turn off auto squelch To turn maximum range extender off Mode/Lock Enter/HiLow PowerTo connect a wall charger/adapter MicroTALK Range Mode FunctionsScrolling through Mode Functions Your range will vary depending on terrain and conditions To select a privacy code Ctcss Privacy CodesAfter selecting a channel, press Use the Channel Up or Channel Down NOAA* All Hazards Radio ChannelsTo listen to All Hazards Radio channels Press the Mode/Lock button to proceed to other functions Choose one of the following Mode/Lock Button To turn VOX mode on or offVoice Activated Transmit VOX To set VOX sensitivity Memory Locations To program a memory location Through Mode/Lock Button To recall a stored memory channel locationWhile recalling a stored memory location Mode/Lock Button To de-program a memory location While de-programming a memory location Channel Scan Your microTALK radio can automatically scan channels Privacy Code Scan To scan privacy codes If you press the Talkbutton while scanning, but more than Memory Location Scan Mode/Lock Button To scan memory locations Mode/Lock Button To change a call tone setting Call ToneSettingsIf you press the Talk button while scanning, but more than Functions Button to select roger beep on or offChoose one of the following Keystroke Tones General Specifications FRS/GMRS Frequency Allocation and Compatibility FCC Licensing and Product Service Questions Product Service Questions For Products Purchased in the U.S.A Limited One-Year Warranty on Radios & Charger Warranty and TrademarksTrademark Acknowledgement