Cobra Electronics Two-Way Radio manual Memory Locations, To program a memory location

Mode Functions

Operation

10 Memory Locations

•

Your microTALK radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 18 for memory location scan.)

Mode/Lock Button

Memory Icon

Channel Buttons

Enter/Hi-Low Button

To program a memory location:

1.Press the Mode/Lock button until the Memory icon and the Memory Location flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Enter/Hi•Low button to enter a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Enter/Hi•Low button. The privacy code numbers will flash on the display.

6.Press the Channel Up or Channel Down button to select a privacy code (00 to 38).

7.Choose one of the following:

a.Press the Enter/Hi•Low button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b.Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and return to Standby mode on the selected memory location.

12