Page 10 Coby Electronic s Corporatio n
www.cobyusa.com Page 11
English
Getting Started
Using the AC Power Supply
Make sure that the voltage of your electrica l power supply
corresponds to the voltage indicated by the man ufacturer.
If the voltage is incorrect, consult your dea ler or service
center.
This unit should b e used with 120V or 220V wall
outlets, only. The voltage selector on the bottom
of the unit must be set to the appropriate voltage
before connection.
Connect the electrical cord by plug ging it into the wall
outlet. Keep objects clear of the cord w here it connects to
the device and to the wall. Do not stretch the cord.
To completely disconnect the device from the ele ctrical
supply, unplug the power cord from the outlet.
For your safety, unplug the device during electrical
storms.
Installing/Replacing t he Remote Control Batterie s
Your remote control comes with batteries pre-ins talled.
Remove battery insulator tape befo re use. Batteries should
be replaced when remote control perfo rmance diminishes
or stops.
To replace the batteries:
Open the battery door on the back o f the unit.
Remove the battery door.