4 Replacement Procedures

4.5 Display Assembly

Installing the Display Assembly

Install the display assembly according to the following procedures and Figures 4-7.

1.Place the display panel in the correct position.

2.Connect the CCD cable to CN2250 on the system board.

3.Connect the MIC cable to CN208 on the system board.

4.Connect the LCD cable to CN3000 on the system board.

5.Secure the display assembly with two M2.5x4 black flat head screws.

6.Close the display panel

4-18

Satellite/E200/E205 Maintenance Manual

Page 160
Image 160
Toshiba E205 manual Replacement Procedures Display Assembly, Installing the Display Assembly