3 Diagnostic Programs 3.11Error Codes and Description 68
Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Maintenance Manual
28xx 1394
01 Can not find IEEE1394
controller Don’t support 1394.
20xx IDE-HDD
01 Get Parameter Fail ! Wrong test parameters are input
by user. Reinput the correct parameters.
02 Write Pattern Error HD is damaged. Send the HD for repair.
03 Data Compare Error HD is damaged. As above.
04 Read Verify Error HD is damaged. As above.
05 Seek Error HD is damaged. As above.
06
Disk Controller Self Test
Failed The HD controller is damaged. As above.
07
Disk Controller Test
unexpected interrupt
Failed The HD controller is damaged. As above.
09
Disk Controller action
Test Failed The HD controller is damaged. As above.
10
Disk dos not support
SMART Disk dos not support SMART Change HD which supported
SMART and test again
11
Disk read attribute
threshold error Disk read attribute threshold
error Send the HD for repair.
12
Disk read attribute value
error Disk read attribute value error As above.
13
Disk SMART attribute
value error Disk SMART attribute value
error As above.
21xx ODD
01
No Disk in CDROM No disk is found in the CD-
ROM. Insert a disk into the CD-ROM.
02
The Disk in CDROM is
not Data Disk The disk in the CD-ROM is not
Data Disk. Insert a DATA CD.
03
IDE-CD Controller Error Functional errors with the CD-
ROM. Send the CD-ROM for repair.
04
CD Read Error Either the disk or the CD-ROM
is damaged. Replace the disk or send the CD-
ROM for repair.
07
CD Seek Error Either the disk or the CD-ROM
is damaged. Replace the disk or send the CD-
ROM for repair.
09
Eject Error Wrong CD-ROM drive. Exit from the wrong drive.