4.17 DC-IN cable, RGB Board and RJ45 cable

4 Replacement Procedures

Installing DC-IN cable, RGB Board and RJ45 cable

Install the DC-IN cable, RGB Board and RJ45 cable to the following procedures and Figure 4-28.

1.Seat the RJ45 cable in the correct position.

2.Seat IO bracket cover in the correct position of IO bracket, then secure it with two M2x3 black flat head screws

3.Seat IO bracket and IO bracket cover in the correct position of top cover then secure them with two M2x3 black flat head screws.

4.Seat the DC-IN cable in the correct position.

5.Seat the RGB board in the correct position.

6.Secure the RGB board with two M2x3 black flat head screws.

7.Connect the RGB cable to CN9600 on the RGB board.

8.Secure the RGB board cable with one M2x3 black flat head screw.

Satellite/E200/E205 Maintenance Manual

4-47

Page 189
Image 189
Toshiba E205 manual DC-IN cable, RGB Board and RJ45 cable Replacement Procedures