3 Diagnostic Programs | 3.2 Quick Start |
7 Test5
8Inspection
9Setting Calibration data
The display of a test program and the set method of PC are shown below.
Display of a Test Program
Set method of PC | Left |
Upper
Judgment
If all data is less than ranges, it will be OK.
Judgment
If all data is less than ranges, it will be OK.
When an inspection result is O.K., calibration at HPC.
If it succeeded, the system will prompt a message of PASS, otherwise the message will be FAIL.The test information will be written in log file.
Note:
Please do not use this program, when you test PC without 3D sensor.
16Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Maintenance Manual
