4 Replacement Procedures | 4.8 HDD |
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.
3.Place the HDD pack on a flat surface (such as a desk), and remove the four M3x4 black flat head screws.
4.Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
HDD
M3x4 black flat head screw
HDD chassis
M3x4 black flat head screw
Figure 4-11 Removing the HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.
Satellite/E200/E205 Maintenance Manual |
