3 Diagnostic Programs

3.11Error Codes and Description

3.11 Error Codes and description

The format of ‘Error Code’ is ‘ddxxee’, and ‘dd’ is the device ID (1~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is the error code of device (2 chars); the range of error code is from 01 to 99 in each device (the common error codes in all device are set to 99 and spanned).

Device

Error

Description

Cause

 

Code

 

 

ddxx

ee

Common Error

 

 

94

Interactive Mode Needed

The test is not under interactive

 

mode.

01xx

 

CPU

 

 

 

 

 

 

01

CPU General Function

The CPU General Function

 

Error

register is damaged.

 

 

 

02

CPU Arithmetic Error

The CPU Arithmetic Register is

 

damaged.

 

 

 

 

03

CPU Logic Error

The CPU Logic Register is

 

damaged.

 

 

 

 

04

CPU Type Error

The CPU Type is not

 

supportable.

 

 

 

 

05

CPU Speed Error

The CPU speed differs from the

 

expected value.

 

 

 

 

06

NPU General Function

The NPU arithmetic unit is

 

Error

damaged.

 

 

 

07

NPU Interrupt Error

The NPU is damaged.

 

08

CPU Information Error

Information of the CPU cannot

 

be acquired.

 

 

 

 

09

Protected Instruction Error

The CPU is damaged.

02xx

 

Memory

 

 

01

Read Error

The ROM BIOS has Physical

 

problems.

 

 

 

 

02

Write-Protect Error

The ROM BIOS has Physical

 

problems.

 

 

 

 

 

 

The test pattern read out from the

 

03

Base Memory Error

base memory is different from

 

Address

the one that has been written in

 

 

 

 

 

this address.

 

 

 

 

 

 

 

The test pattern read out from the

 

04

(XMS)Memory Problem

extension memory is different

 

from the one that has been

 

 

 

written in this address.

 

 

 

 

 

05

(XMS) Out Of Range

Wrong parameters setup.

Action

Check whether the interactive test mode is adopted.

Replace the CPU.

As above.

As above.

Check whether the CPU is Intel CPU.

Check the CPU speed and the set expected speed.

Replace the CPU.

As above.

Check whether the CPU is Intel CPU.

Replace the CPU.

Test this unit on multiple machines.

As above.

Test this memory chip on multiple machines.

As above.

Check and reset the parameters.

64Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Maintenance Manual

Page 130
Image 130
Toshiba E205 manual Error Codes and description, Diagnostic Programs 11Error Codes and Description